Stock Image

2019 OEC ELITE MTS MXR109824

• Vas 30
• Super C
• Non Touch

Digital Image Orientation

• Digitally adjusts image display for live and last image hold
• Automatic image update preserves image orientation settings applied during live and last image hold for subsequent images
  • Image rotation
  • Live and last image hold rotated in real-time
  • On-screen display of rotation degrees
  • Image reversal (left-to-right)
  • Image invert (top-to-bottom)
• On-screen orientation indicator

(real-time feedback without fluoroscopy)

• Fully digital with precise 1 degree rotation increments or auto-repeat for quick rotation (CFD models)

Image Processing

• 5 k x 1.5 k x 16 bit: CFD

Generator

• 60 kHz high frequency
• 15 kW power
• Up to 120 kVp
• Continuous high level fluoroscopy (HLF) up to 20 mA
• Pulsed HLF up to 40 mA
• Digital spot up to 75 mA
• Full power from a standard wall outlet

Patented battery buffered design

31 cm CMOS Flat Panel Detector (CFD)

• Tri-mode 31 cm/21cm/15 cm
• Minimum central resolution (at display):

– 31 cm: 1.8 Ip/mm

– 21cm: 2.2 Ip/mm

– 15 cm: 2.4 Ip/mm

• Matrix: 1548 x 1524 total pixels
• DQE(0): 72%
• Pixel Pitch: 0 µm
• Removable grid with on-screen detection status

X-ray Tube

• Rotating anode X-ray tube
• 3 mm and 0.6 mm nominal focal spots
• Anode heat capacity: 300,000 HU
• Anode cooling rate: 85,000 HU/min
• Housing heat capacity: 1,600,000 HU/min
• Housing cooling rate:
  • 31 cm CFD – 31,000 HU/min

PreView Collimator

• On-screen collimator position indication
• PreView iris collimator
• PreView Tungsten rotatable double leaf collimator
• Adjust collimators without X-ray exposure

Fluoroscopy Mode

• kVp range: 40 – 120
• mA range: 2 – 10 normal mode

0.2 – 20 HLF

• Auto and manual fluoroscopy modes

Pulsed Fluoroscopy Mode

• kVp range: 40 – 120
• mA range: 2 – 10 normal mode

0.2 – 40 HLF

• Pulse rate: 8 pps
• Pulse width: 25 ms
• Auto and manual pulsed fluoroscopy modes
• Reduces X-ray dose to patient and operator

Digital Spot Mode

• kVp range: 40 – 120
• mA range: Up to 75
• Automatic exposure termination and automatic image save

AutoTrak

Automatic Brightness Stabilization (ABS}

• Automatically seeks the subject anatomy anywhere within the imaging field
• Selects the optimum imaging technique by varying mA, kVp, and gain
• Automatically adjusts to anatomical size

and location

• Provides uniform image quality throughout the entire image

Image I.Q.

• Smart Window
  • Dynamically senses the collimator position and automatically adjusts image brightness and contrast
• Smart Metal
  • Adjusts brightness and contrast automatically and allows user to adjust sensitivity levels for optimum image quality even when metal is introduced into the field
• Tungsten Collimator
  • Denser collimator limits X-ray exposure area
  • Reduces scatter radiation
  • Improves image detail

Available Feb

Locate in NJ